Wall Light Bar – Cordless Linear Fixture with Remote Dimming and Timer

Wall Light Bar – A Clean Line of Light on Any Wall, With No Wiring Behind It

A slim horizontal bar that runs on an internal battery and charges over USB-C, so it goes up wherever you want light rather than wherever an outlet happens to be. Brightness is adjustable and a remote handles it from across the room. Lengths run from 26.8 to 50.4 inches, in finishes that mix matte metal with brass detailing.

Why choose a cordless wall light bar?

Hardwiring a fixture means an electrician, a junction box and a hole in the plaster. This one mounts with two screws and lifts off the bracket when it is time to charge. That makes it as much a piece of wall decor as a light source, and you can move it when the room changes.

• Remote control — adjust brightness from the sofa without walking over to the fixture.
• Stepless dimming — take it from a soft evening glow up to full working brightness.
• Shut-off timer — set it to switch itself off after a set period and forget about it.
• USB-C charging — top it up from an outlet or leave it mounted and run it off a power bank.
• Detachable bracket — lifts off the wall plate in one motion and clicks back the same way.

One straight line of warm light, and nothing running down the wall underneath it.

Mount it above a console table, along a hallway or over the head of a bed where a cable would show. The bar draws roughly 12 to 18 watts depending on length, so the longer sizes throw a noticeably wider wash. Note that this version is built for surface mounting only and does not come with a round junction-box plate.

Specifications

• Metal bar with brass-tone accents
• Lengths 26.8–50.4 in (68–128 cm), 3.1 in deep
• Roughly 12–18 W depending on length
• Rechargeable battery, USB-C cable included
• Weight 2–2.4 lbs (0.9–1.1 kg)

Pick your length and put the light where the wall needs it.