Solar Stair Lights – Wire-Free Install and IP65 Weather Rating

Solar stair lights that mark every step without any wiring

Each unit carries its own solar panel and LED, so there is nothing to wire and nothing to plug in. A dusk sensor switches them on when the light drops and off again at sunrise. Four to five hours of daylight gives eight to ten hours of warm white light after dark.

Why choose these stair lights?

They go on a deck, a porch, a garden path or a set of yard steps in an afternoon. Both double-sided tape and screws are in the package, so you can fix them to wood, stone or composite. Packs of 4, 10 and 20 cover anything from a short flight to a full run of steps.

• No wiring: Each light is self-contained, with tape and screws included for mounting.
• Dusk sensor: The lights come on by themselves at nightfall and shut off at dawn.
• IP65 rating: Built for rain, snow and dust year round.
• Rectangular solar panel: A wider panel takes in more daylight during short winter days.
• Warm white LEDs: Enough light to see each step without glare.

Running costs are zero, since nothing draws from the mains.

Mount them on the riser of each step or along the side wall of a stairway, roughly at ankle height, so the beam falls on the tread. Give each panel a spot that catches a few hours of direct sun, and keep the panels clear of leaves and dust to hold the full run time. Choose the pack size by counting your steps first, then adding a couple for the path leading up to them.

Specifications

• Power: solar, 4-5 hours charging for 8-10 hours of light
• Light source: warm white LED
• Weather resistance: IP65
• Control: automatic dusk sensor
• Mounting: double-sided tape and screws included

Pick your pack size and light the steps before dark.