Candle Warmer Lamp – Steel and Wood with a 1, 2 or 4 Hour Timer

Candle Warmer Lamp – A Curved Steel Arm, a Flicker Mode and a Timer That Ends It

A curved warmer in cold-rolled steel with wood accents, holding the bulb out over the candle on a slim arm. Brightness runs on a continuous dimmer, and a flicker setting mimics the movement of candlelight. The timer stops it after one, two or four hours.

Why choose a dimmable candle warmer lamp?

A fixed brightness is either too much for the evening or too little for reading. Continuous dimming covers the whole range from one control. Pair that with a timer and the lamp handles both ends of the evening without you.

• Continuous dimming — no fixed steps: run it bright to read or turn it down to a low wash.
• Flicker mode — a candlelight-style movement in the glow when a steady beam feels too flat.
• 1, 2 or 4 hour timer — choose a run time and the lamp shuts down on its own.
• Cold-rolled steel — a rigid curved arm that holds the shade steady over the wax.
• Wood accents — warm up the metal so it reads as decor rather than hardware.

Dim it, set it, and let the room take care of the rest.

The curved arm suspends the bulb clear of the jar, so you can lift the candle out without touching the shade. Start at full brightness to get a melt pool going, then dim once the scent comes through. Keep it out of a draft, where the warmth drifts off the wax.

Specifications

• Cold-rolled steel with wood accents
• Continuously dimmable halogen light
• Flicker and steady light modes
• Timer settings of 1, 2 or 4 hours

Set it to two hours and let it run.