Motion Sensor LED Strip – Cuttable, Waterproof, USB or Battery

Motion sensor LED strip that lights the way before you reach for a switch

A flexible strip that switches itself on when it picks up movement and switches off again once the area is clear. It can be cut to length, curled around corners and taped in place. Power it from a USB port or from four AAA batteries.

Why choose this LED strip?

Stairs, closets and hallways are the places where a wall switch is never in the right spot. The sensor covers that gap. Three modes let you decide whether the strip stays lit, works only after dark or runs constantly.

• Motion activation: the sensor turns the strip on when you move into range, with three selectable modes.
• Cut to length: the soft strip can be shortened, curled and shaped to follow the space.
• Adhesive backing: double-sided tape on the back holds it to wood, tile and metal.
• Weather resistant: the sealed housing handles damp rooms and sheltered outdoor spots.
• Two power options: USB plug-in where there is an outlet, 4 x AAA batteries where there is not.

Once it is up, the strip takes care of itself.

Under a kitchen cabinet it lights the counter while your hands are full. Along a staircase or a hallway baseboard it marks the route at night without waking the house. Outdoors it works under a porch roof or along a step, where the sealed housing keeps moisture out.

Specifications

• Material: PVC housing
• Length: 1 / 2 / 3 m (3.3 / 6.6 / 9.8 ft)
• Power: 4 x AAA batteries or USB plug-in, 5V
• Water resistance: IP65 rated
• Rated life: approximately 5,000 hours

Put the strip where the switch never was and let it do the work.