Folding Table Leg Brackets 2-Pack – Self-Locking Heavy-Duty Steel

Folding Table Leg Brackets – The hinge that makes a table fold flat

A pair of 2.5 mm steel brackets that mount between a top and its legs, lock automatically when the legs swing down, and release with a lever when you want the whole thing flat again. Rated to around 225 kg for the pair, which is workbench territory rather than side-table territory.

Why choose self-locking brackets?

The failure mode of a cheap folding table is the leg quietly collapsing while something heavy is on it. A bracket that locks positively when it opens takes that away entirely — the leg cannot fold until you press the release. That is the whole difference between a table you trust and one you do not.

• Self-locking – the leg locks in the open position automatically, no separate catch.
• 2.5 mm steel – heavy gauge, not pressed tin.
• Around 225 kg per pair – enough for a work surface, not just a folding tray.
• Release lever – one hand, and the legs swing back under the top.
• 16 screws included – everything needed to mount both brackets.

The part that decides whether a folding table is any good.

Mount both brackets the same distance in from the edge and check they open square before driving the final screws — a bracket a few millimetres out puts the whole table on a twist. The load rating assumes a solid top and legs of a matching gauge; a bracket is only as strong as what it is screwed into. Good for folding tables, workbenches, bed frames and camper conversions.

Specifications

• Material: steel
• Thickness: approx. 2.5 mm
• Locking: self-locking folding mechanism
• Size: approx. 63 × 68 × 54 mm per bracket
• Included: 2 brackets and 16 screws

Screw them on and fold the table away.