Carbide Grinding Disc – Wood Carving Wheels for Standard Angle Grinders

Carbide Grinding Disc – Takes wood down fast and keeps its bite

Tungsten carbide discs that mount on a standard angle grinder and shape wood quickly. The coating is made up of hundreds of sharp points that remove stock where sandpaper would clog. Flat, bevel and arc shapes are available, separately or as a three-piece set.

Why choose a carbide grinding disc?

Sanding discs wear out in minutes on green or hard wood. Carbide keeps cutting long after a stack of abrasive pads would be finished. Fit one to the grinder you already own and you have a carving tool.

• Tungsten carbide grit — hundreds of hard points that outlast a pile of sandpaper pads.
• Three profiles — flat for surfaces, bevel for edges, arc for hollows and curves.
• Standard 16 mm bore — drops onto a common angle grinder without an adapter.
• Fast stock removal — shapes convex and concave areas without stopping to change pads.
• Sturdy body — holds its shape under load instead of deforming.

From rough blank to finished shape, without a drawer full of worn pads.

Let the grinder reach full speed before the disc touches the wood, and work in light passes rather than leaning in. Keep the disc moving so you do not burn a groove into the grain. Eye protection and a dust mask belong with this kind of work.

Specifications

• tungsten carbide on steel
• outer diameter 100 mm (4 in) flat and bevel, 85 mm (3.3 in) arc
• inner bore 16 mm (5/8 in)
• fits standard electric angle grinders

Mount one and start shaping.