Wall Light – Wooden Base and Scaled Glass Shade with an E26 Socket

Wall Light – Light That Lands on the Wall as a Pattern

A wooden base with copper detailing carries a glass shade pressed with a scale motif. The relief breaks the light so a pattern falls across the wall instead of a flat wash. The socket takes E26 or E27, so you choose the bulb.

Why choose a wall light with a textured glass shade?

Most wall fixtures do exactly one thing: put a circle of light on the plaster. A worked shade turns that into a drawing, and the drawing changes with the bulb you fit. The wood and copper underneath keep the whole thing warm in tone.

• Scale-textured glass — the light falls in facets across the wall rather than a circle.
• Wooden base — a natural backing that softens the metal and glass above it.
• Copper detailing — the hardware holds a warm tone even with the light off.
• E26 or E27 socket — takes LED or incandescent bulbs up to 40 watts.
• 9.5 x 8 inch format — large enough to register, small enough for a narrow wall.

A fixture that leaves something behind on the wall, not just light.

No bulb is included; a clear one gives a sharper pattern than a frosted one. Mount it where the adjacent wall is free, so the pattern has somewhere to land. Clean the glass with a soft, barely damp cloth once the fixture is cold.

Specifications

• wood, copper and pressed glass
• 9.5 x 8 in (24 x 20 cm)
• E26 or E27 socket, max 40 watts
• bulb not included
• wall mount

Put it up and see what the light does to the wall.